Tag Archives: QuickPwn

[iPhone] HowTo Jailbreak and Unlock using RedSn0w

I. Abstract

The following article will show you how to install firmware 3.0 on your iPhone 2G by also allowing to jailbreak, activate and eventually to unlock (JAU process). At the moment of writing this article is for Mac OS X users with iPhone 2G’s only.

II. Who needs this article?

We suppose 50% of all 2G users around the globe. As iPhone 2G’s were sold almost everywhere with Sim-Lock enabled (besides some T-Mobile Germany or Orange France unlocked 2G’s).

III. Warning

You’d better read all of this in detail before you do anything practically! If you feel there is something you don’t understand or something you will not be able to handle, then go and ask someone who is in the know.

!!!!!!!! Otherwise your devices may be terribly screwed up! !!!!!!!

IV. Required Downloads

Download these tiny things first:

» RedSn0w for Mac OS X
» iPhone OS 3.0 for iPhone 2G
» if you are using an iPhone 2G: get Bootloader 3.9 and 4.6

RedSn0w is almost the same as QuickPwn was in the ancient days of iPhone firmware 2.x

V. Preparing for Take off

  1. you need to have iPhone OS 3.0 already installed / updated /restored via iTunes
  2. install RedSn0w
  3. start RedSn0w
  4. Browse to the downloaded restore firmware (iPhone1,1_3.0_7A341_Restore.ipsw)
  5. Wait for the firmware to be checked

  6. Click Next
  7. Wait for the firmware to be modified
  8. Select Install Cydia (and Unlock if you are using an iPhone 2G. If you are using an iPhone 3G, don’t select to unlock, since it will not work this way)
  9. Click Next
  10. Browse for the Bootloaders you downloaded
  11. Click Next
  12. Turn your iPhone off
  13. Turn iTunes off

VI. Fasten your seat belts // Get into DFU mode

  1. Click Next
  2. bring out beloved jesus phone into DFU mode
  3. RedSn0w guides you thru the required steps (anyway this may take several repetitions as this is not as easy as some people write on the net!)

VII. Ignition sequence start

  1. the uploaded modified ramdisk will do all the required stuff
  2. to indicate what is going on your iPhone will show some nice pictures like this:
  3. don’t disturb the process
  4. instead: relax and get yourself a good drink or a cigarette
  5. as this may take some minutes

VIII. Possible issues

Although we haven’t been reported any yet, this doesn’t mean there can’t go something wrong. If you run into problems, try:

  • restoring original unmodified 3.0 firmware from within iTunes 8.2
  • make sure you installed firmware 3.0 with iTunes 8.2
  • generate a custom pre-hacked ipsw using PwnageTool (find article here)

IX. Kudos

Fly out to the iPhone Dev Team. You guys should get paid by Apple…

[iPhone] HowTo Jailbreak and Unlock using PwnageTool

I. Abstract

The following article will show you how to install firmware 3.0 on your iPhone 2G by also allowing to jailbreak, activate, and eventually to unlock (JAU process). At the moment of writing this article is for Mac OS X users with iPhone 2G’s only.

II. Who needs this article?

We suppose 50% of all 2G users around the globe. As iPhone 2G’s were sold almost everywhere with Sim-Lock enabled (besides some T-Mobile Germany or Orange France unlocked 2G’s).

III. Warning

You’d better read all of this in detail before you do anything practically! If you feel there is something you don’t understand or something you will not be able to handle, then go and ask someone who is in the know.

!!!!!!!! Otherwise your devices may be terribly screwed up! !!!!!!!

IV. Required Downloads

Download these tiny things first:

» Pwnage 3.0 for Mac OS X
» iPhone OS 3.0 for iPhone 2G
» if you are using an iPhone 2G: get Bootloader 3.9 and 4.6

V. Preparing for Take off // Prepping your custom iPhone OS 3.0

  1. make sure you synced your iPhone with iTunes before to have all your current calendar and address book entries in a safe place
  2. Install PwnageTool
  3. start PwnageTool
  4. Choose Expert Mode
  5. Select iPhone
  6. Click the Next button (down right of PwnageTool window)
  7. Select (or browse for) the iPhone1,1_3.0_7A341.ipsw firmware
  8. Click the Next button
  9. You now may choose some more Cydia Packages (like SSH), but you can also safely install this later via Cydia on the iPhone. This is a matter of taste
  10. Click Create (here in german “Erstellen”)
  11. Click the Next button
  12. Select a location to save the custom firmware 3.0
  13. wait some minutes for the creation of your custom firmware 3.0
  14. you may provide your adminstrator password during creation phase, this is normal !

VI. Fasten your seat belts // Get into DFU mode

  1. in case you never pwned your iPhone before: bring it into DFU mode first.
  2. PwnageTool guides you thru the required steps (anyway this may take several repetitions as this is not as easy as some people write on the net!)

VII. Ignition sequence start // Restore

  1. start iTunes (make sure you’re using iTunes 8.2)
  2. Select your iPhone (found on the left column under devices)
  3. and hold the Alt Key and Click the Restore button (this allows browsing for your custom firmware)
  4. The iPhone software will be extracted and prepared for restoring
  5. in the meantime your iPhone will show a status bar like this:
  6. The whole process will take some minutes, don’t wonder about that

VIII. Possible issues

You may receive an “unknown error 1600”, “unknown error 2001”, “unknown error 10”, or “unknown error 20” . If this is the case you may try this:

  • restore the original unmodified iPhone firmware 3.0 first and the re-restore your custom firmware and
  • try aswell in DFU mode as in normal mode
  • if all that does not work: restore with original unmodified iPhone firmware and jailbreak with redsn0w (article here)

IX. Kudos

Fly out to the iPhone Dev Team…

[iPhone] Issues with iPhone DFU mode in MacOS 10.5.6

According to forum reports the iPhone DFU mode, which is required to install custom firmware with PwnageTool, does not get detected properly after updating Mac OS X to 10.5.6.

That means you cannot Jailbreak or Unlock the iPhone currently. The iPhone Dev Team has investigated in to this issue and comes to the conclusion that this is not a countermeasure by Apple, but a bug in the new kernel.

The Phone Dev Team names possible fixes for 10.5.6. As always: you do this at your own risk!

1. Replace the following plugin kexts from within IOUSBFamily.kext with the ones from 10.5.5 and then rebuild kextcache (if you don’t understand this, then you shouldn’t attempt it!)

/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBHub.kext

/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/IOUSBCompositeDriver.kext

2. Use a USB hub in-between the DFU device and the Mac and insert/reinsert the iPhone’s USB cable.

3. Use a PwnageTool created .ipsw on Windows! Oh the irony!

If you did not update yet to 10.5.6 better don’t do it and wait for a fix or for 10.5.7 to be released.

[iPhone] HowTo Activate and Unlock using QuickPwn 2.1

I. Abstract

This is a short HowTo since all of you by now know how to use QuickPwn, don’t you? in short: QuickPwn is an Après-Tool. Means: you let iTunes 8 do the update process and use QuickPwn afterwards to “open” your device. Note:

  • 2G iPhones can be jailbroken and unlocked
  • 3G iPhones can be jailbroken, but not unlocked
  • iPod Touch 1st generation can be jailbroken
  • iPod Touch 2nd generation can not be jailbroken

Our article will not cover the iPod Touch, but the iPhone.

II. Requirements

III. Warning

Jailbreaking and unlocking is illegal to be performed with iPhone devices that are part of a current agreement (mostly 12 or 24 months). You would violate your contract by jailbreaking and unlocking! Don’t do it.

  • If you’re updating: all your Cydia and Installer.app based applications will be lost and need to be installed again!
  • Make sure you make a backup of your data!

IV. Update iPhone firmware

  • connect your iPhone with your PC
  • start iTunes 8
  • choose your iPhone (under devices)
  • hold the shift-key (on your keyboard) and do a mouse-click on the Update Button – a file-open window will pop up like this:
  • locate the downloaded firmware 2.1 (named: iPhone1,1_2.1_5F136_Restore.ipsw) and open it
  • iTunes will begin to update your iPhone automatically





  • After having updated the iPhone will reboot. If you are using an already Pwned iPhone it will remain activated and unlocked, you only need to jailbreak.

IV. QuickPwning it :-)

  • Let your iPhone plugged to your computer
  • Close iTunes
  • Start QuickPwn 2.1-1
  • You will be greeted with the Device Detection screen, click the right-arrow to proceed:
  • on the next window, click the Browse button to locate your iPhone1,1_2.1_5F136_Restore.ipsw firmware:

  • QuickPwn will check if the firmware matches the version currently running on your iPhone and will allow you to proceed (click the right-arrow):
  • the next windows allows you to select, what you want to install. We recommend to install both Cydia and Installer.app. If your iPhone has not been unlocked until now, here you can also choose to simunlock it. As we are quite conservative: we never change the boot logos, but this seems to be a matter of taste. After having selected, click the right-arrow button to proceed.
  • For safety reasons, QuickPwn will remind you to leave your iPhone plugged to your computer, click the right-arrow button to proceed
  • Read and follow the instruction on this window very carefully! QuickPwn will help you counting!
  • After that, QuickPwn will take control and perform the following actions automatically:


  • When all the tasks have been completed, QuickPwn has finished.
  • Your iPhone will perform some more actions for the next few minutes. It will show it is changing the NOR and so on and will reboot then.

After having rebooted your iPhone will be perfectly jailbroken and unlocked

V. Final words

Guys, we hope we could clarify some more things here than others did. We appreciate your comments on this. Kudos to all of you and remember to consider our sponsors, they really got the coolest offers ;-) Kudos fly out to the iPhone Dev Team! Live long and prosper, guys.

[iPhone] Firmware 2.1 Released

Apple made their promises come true. Firmware 2.1 is out now. If you are using a pwned iPhone – don’t update now, as it is unclear at the moment, if the iPhone remains unlocked. According to Apple firmware 2.1 should:

  • Decrease dropped calls
  • improve battery life
  • reduce backup time
  • improve email reliability (POP and Exchange)
  • allow faster installation of 3rd party apps
  • reduce hangs and crashes for users with lots of third party applications (we don’t know either what exactly does “lots” mean?)
  • improve performance in text messaging
  • allow faster loading and searching of contacts
  • improve accuracy of the 3G signal strength display
  • and some more…

Rumors say updating the iPhone to 2.1 and using QuickPwn with firmware 2.0.2 in order to jailbreak should work. We can’t confirm this and moreover: we definitely recommend not to try this. iPod Touch may want to visit QuickPwn to find further instructions for dealing with 2.1.

As conservative users: wait a couple of days. The iPhone Dev Team is most likely on their marks…

[iPhone] QuickPwn 1.0 for MacOS X released

Our fellow iPhone Dev Team yesterday finally released QuickPwn for MacOS X. Sadly the Dev Team in the first place only provided a .torrent link (get torrent here) for distribution. We will come up with further details soon. For now: there are no reports about bugs about this version for Mac ,yet. Use “Archive Utility” to unpack, otherwise permission may be screwed up. Thumbs up for the Dev Team.

SHA1 sum: QuickPwn_1.0.0.tbz (via torrent) = 22ee0d6814a6bac9b1b9a8c7715dd714bd6bb449

[Update] Download QuickPwn 1.0 for Mac from these mirror locations now: RapidShare and iPhone-Hacks.com.

[iPhone] PwnageTool Release Candidate 3 and QuickPwn Beta updated

Our beloved iPhone Dev Team yesterday released updated versions of QuickPwn for Microsoft Windows (now with improved Windows 64bit handling) and PwnageTool for MacOS X (fixes the permission issue, mentioned here). If you have PwnageTool installed yet, it should bravely auto-update.

We had no time yet to test neither the Windows version nor the Mac version. Firmware 2.0.2 is reported to be only a series of bugfixes. People report, their devices run a little smoother. If you don’t encounter problems running your current iPhone / iPod Touch firmware, we would not recommend to update right now. It is rumored Apple will the release stable firmware 2.1 in september.

» Windows QuickPwn RC3 Download here
» MacOS X PwnageTool 2.0.3.1 Download here (mirror here)…

a{e

[iPhone] PwnageTool Release Candidate and QuickPwn Beta available

Our fellow iPhone Dev Team is unrestingly working for the entire iPhone/iPod Touch community. The team today released a release candidate of their well known PwnageTool (version 2.0.3), that now supports firmware 2.0.2 5C1. PwnageTool 2.0.3 is only available for MacOS X.

Moreover they released another Beta of the QuickPwn tool. In contrast to PwnageTool QuickPwn lets you simply update your iPhone using the internal updater of iTunes. After that QuickPwn helps you to activate, jailbreak and unlock (only for iPhone 2G). QuickPwn is available for Microsoft Windows only. It is not recommended to use it in a virtual machine, since USB ports may not be running in real time.

If you are using your iPhone not only as a gadget, but as a productive device: we recommend to not use either PwnageTool Release Candidate or QuickPwn Beta right now. You may stick to iPhone firmware 2.0 or 2.0.1 for another week. Once the final version of one of the tools is available we’re gonna release a simple step-by-step tutorial.

Big shouts from Germany ;-) fly out to the iPhone Dev Team.

»  iPhone Dev Team: QuickPwn for Windows and PwnageTool for Mac

[Update] In forums people report problems with the mail authentication (Mail.app) after running Pwnage 2.0.3 RC. Although a manual solution for this issue is simple (have SSH installed and chmod 0777 /var/Keychains Shouts to Nettwerk), we don’t recommend to update now.